Bayani
An ƙirƙira muƙamuƙin maƙallan makullin muƙamuƙi tare da CRV-CR-MO alloyed karfe, kuma gefen zai iya yanke wasu wayoyi na ƙarfe bayan babban jiyya na kashewa, tare da tauri mai ƙarfi.
Saurin-saki auto daidaitawa rike: Ya yi da dual launuka roba abu, wanda yake anti-skid da aiki-ceton.Tsarin daidaitawa da kansa zai iya kawar da tsarin faɗakarwa na gama gari na faifan kullewa na gargajiya, yana sauƙaƙa manne abubuwa cikin sauri, mai saurin aiki da sauri.
Ƙarfin cizo mai ƙarfi: madaidaicin ƙirar tsari yana ba da damar maƙalli mai daidaita kai don yin amfani da ƙarfi mai ƙarfi.
Siffofin
Saurin sakin hannu mai daidaita kai: yana iya danne abubuwa da sauri fiye da maɓallin daidaitawa mai kyau.An ƙera shi bisa ga ergonomics, an yi shi da kayan pp + tpr masu launi biyu, wanda ke hana skid kuma mai dorewa.
An ƙirƙira muƙamuƙi tare da CRV kuma yankan gefen yana ƙarƙashin babban maganin kashewa.Yana da babban taurin kuma yana iya yanke wasu wayoyi na ƙarfe.
Yanke gefen yana da haƙori kuma yana da ƙirar ƙasa mai lanƙwasa, wanda zai iya daurewa da kulle filaye daban-daban, gami da bututu mai zagaye, murabba'in hexagon da sauran abubuwa.
Nuni samfurin
Ƙayyadaddun bayanai
| Model No | Girman | Nau'in | |
| Farashin 1110310006 | 150mm | 6" | Hannun filastik launuka biyu, nickel plated surface |
| Farashin 1110310008 | 200mm | 8" | |
| Farashin 1110310010 | mm 250 | 10" | |
| Farashin 1110330006 | 150mm | 6" | Hannun karfe, nickel plated surface |
| Farashin 1110330008 | 200mm | 8" | |
| Farashin 1110330010 | mm 250 | 10" | |
Aikace-aikacen na'urar kulle kai tsaye:
Na'urar kulle kai tsaye na iya ɗaukar bututu, bututu da sauran kayayyaki, kuma suna iya matse sassa don riveting, walda, niƙa da sauran sarrafawa, kuma ana iya amfani da filan ɗin kulle kai tsaye a matsayin maɓalli.
Hattara yayin amfani da abin kulle kulle kai tsaye:
1. Idan akwai mummunan tabo ko karce a saman auto kai daidaita ma'aunin lilin, ko pyrotechnic konewa, da surface za a iya ɗauka da sauƙi goge da lafiya abrasive takarda (400-500), sa'an nan goge da tsaftacewa zane.
2. Kada a yi amfani da abubuwa masu kaifi da tauri don karce saman kayan aikin kayan aikin na atomatik na'urar kulle filaye.
3. Kula da danshi-hujja.Idan akwai tabon ruwa a saman filayen kulle-kulle masu daidaita kai saboda rashin kulawa yayin amfani, goge shi ya bushe bayan amfani da shi sannan a tsaftace saman kuma ya bushe.
